PAT Sample Holder

Introduction

   PN-PAC sample holder is a necessary accessory for PAT test. The sample holder consists of a lower pin holder, an upper pin holder, and pins. It has the characteristics of convenient operation, no need adjustment, and strong applicability. It can be used to determine the PAT of corrugated cardboard with a compression strength tester.
   PAT tests have strict requirements on the thickness and type of corrugated cardboard. The thickness of single corrugated cardboard should be higher than the lower limit of the corresponding corrugation height specified in the table. For corrugated structures, UV-type structures are required. 

Technical parameter

Pin diameter:φ3.5mm(A Type)；φ3mm(C Type)；φ2.0mm(B Type)；
Sample size: 25mm×100mm(Old GB: 25mm×80mm)；       
Pin axis parallel to the bottom of error:with sample﹤100

1；when force 300N ﹤200

1;
Working environment:Room temp（20  ±  10 ）°C；humidity ＜ 85％；
With loading the sample the largest size: 83mm×66mm×48mm(L×W×H)