Thiết bị kiểm tra rò rỉ đồ bảo hộ y tế GT-RA08A

Protective Clothing and Masks Leakage Tester GT-RA08A

Views:
125
0765 259 545

Protective Clothing and Masks Leakage Tester
Model: GT-RA08A
Brand: GESTER - China
Application:
To test protective clothing against solid airborne particles including radioactive contamination.
The machine use “inward leakage in %”, ratio of the concentration of contaminant in the ambient atmosphere to the concentration of the contaminant in the suit, to evaluate the quality of protective clothing.

Ứng dụng:

Products Information
Comment

Protective Clothing and Masks Leakage Tester
Model: GT-RA08A
Brand: GESTER - China

Standards:
- GB/T 29511-2013 Protective clothing- Chemical protective clothing against solid particulates4.3.1, Annex A
- GB 2626-2019Respiratory protection—Non-powered air-purifying particle respirator 6.4
- GB 19083-2010Technical requirements for protective face mask for medical use ANNEX B

- ISO 13982,
- BS EN ISO 13982 ,
- EN149,
- EN 1073-1-2016
Key Specification

Environmental Requirement	Working temperature	(20±5)℃
	Humidity	≤60%
	Used space	≥4000×5000×3000mm, water in/drain pipe, room with good ventilation
Walked-in Testing Room	Inner effective size	1800mm×1500mm×2100mm(L×W×H)
	Outer size of testing room	1950mm×1650mm×2500mm(L×W×H)
	Control cabinet	700mm×700mm×1600mm(L×W×H)
Environmental Analog detection system	Particle aerosol concentration	(10±1) mg/mPP3
	Aerodynamics size distribution of particle	(0.02~2)μm
	Mass median diameter	About 0. 6μm
	Concentration variation in effective space	≤10%
	Occurrence amount	≥100L/min
Particle Concentration Detector	2 sets
	Dynamic range	(0.001~200)mg/m3
	accuracy	±1%
	response time	≤500 ms
Horizontal Pedal Drive Test-bed	Running speed	(5±0.5)km/h
Other Accessories	Air duct circulation and maintenance of cleaning equipment

Feature
A standard aerosol of sodium chloride particles is generated inside a test chamber in which a test subject, wearing the protective suit under test, carries out a predetermined sequence of test exercises. The inward leakage at each sampling position inside the suit is measured by means of flame photometry.We use following indicator to judge the quality of protective clothing.
- Lijimn: inward leakage for a given test subject (i),suit(j),exercise (m) and sampling position (n)
- Cijmn: concentration of aerosol measured at the sampling point inside the suit for a give test subject(i), suit(j(, exercise(m) and sampling position(n)
- LS: total inward leakage per suit (average over all exercises and sampling positions)
- LH: total inward leakage per human test subject (average over all exercises, sampling positions and suits worn by that test subject)
- LE: total inward leakage per exercise (average over all suits and sampling positions)
- Lp: total inward leakage per sampling position (average over all suits and exercises)
- LEP: total inward leakage per sampling position and per exercise (average over all suits)

- : mean total inward leakage (average over all test subjects, suits, exercises and sampling positions)

Controlling & Analysis system

1.Protective Clothing Against Solid Airborne Particles Tester Central control console, computer programmed control, prompting experiment process;

2.Monitoring test data automatically, calculating individual test inward leakage rate, total inward leakage rate, average inward leakage automatically, output testing result in various way.

Product Similar

Chi tiêt Xem nhanh

ICI Pilling Box Tester GT-C18A

ICI Pilling Box Tester Model: GT-C18A Manufacturer: Gester - China ICI Pilling Box Tester is to determine the surface pilling and snagging properties of both woven and knitted materials.

0765 259 545

Chi tiêt Xem nhanh

Hook and Loop Fatigue Tester GT-K19

Hook and Loop Fatigue Tester Model: GT-K19 Brand: Gester - China Velcro Fatigue Tester is applicable for repeatedly open and close motion for touch and close fasteners and velcro tapes.

0765 259 545

Chi tiêt Xem nhanh

Hand-press Fabric Circular Sample Cutter GT-C75-2

Hand-press Fabric Circular Sample Cutter Model: GT-C75-2 Manufacturer: Gester - China Application: Circular Sample Cutter 100cm2 combine with the electronic balance. Suitable for 100 cm2 x 5mm depth of cut, provided with the cutting mat and the spare blades

0765 259 545

Chi tiêt Xem nhanh

Universal Tensile Strength Testing Machine (Geotextile) GT-C01-3

Universal Tensile Strength Testing Machine (Geotextile) Model: GT-C01-3 Brand: Gester - China Universal Tensile Strength Testing Machine is designed for testing geosynthetics in transportation, water conservation, tunnel, construction those industry.

0765 259 545

Chi tiêt Xem nhanh

Manual Rotary Vertical Crockmeter GT-D45A

Manual Rotary Vertical Crockmeter Model: GT-D45A Brand: Gester - China The Manual Rotary Vertical Crockmeter is used to determine the amount of color transferred from the surface of colored textile materials to other surfaces by rubbing. Application: The Manual Rotary Vertical Crockmeter is used to determine the amount of color transferred from the surface of colored textile materials to other surfaces by rubbing. rotary crockmeter is applicable to textiles made from all fibers in the form of yarn or fabric, whether dyed, printed or otherwise colored and especially to prints where the singling out of areas amaller than possible to test with the standard AATCC Crockmeter (AATCC Method 8) is required.

0765 259 545

Chi tiêt Xem nhanh

Protective Clothing Blood Penetration Resistance Tester GT-RC01-1 /

Protective Clothing Blood Penetration Resistance Tester Model: GT-RC01-1 / GT-RC01-4 (Working position: 4) Brand: Gester - China Application: This Protective Clothing Tester is used to determine the resistance of a protective clothing material to penetration by synthetic blood.

0765 259 545

Chi tiêt Xem nhanh

Heel Fatigue Tester GT-KB15

Heel Fatigue Tester Model: GT-KB15 Brand : Gester - China Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel tip.

0765 259 545

Chi tiêt Xem nhanh

Double Wings Drop Falling Tester GT-LC05-2

Double Wings Drop Falling Tester Model: GT-LC05-2 Brand: GESTER Product Introduction Application: GT-LC05-2 Double Wings Drop & Falling Tester In the process of moving or transporting the product, there may be a drop in the product and damage to the internal product. The damage can be prevented in advance, that is machine is expected to be tested for the best possible solution so that it can be minimized during transport loss. Drop Tester Machine Standards: ISO 2248, JIS Z0202, GB/T4857.5, ISTA Package drop testing equipment Principle This series of drop test machine, using double column to the spring buffer, height scale instructions, stable and reliable, can be achieved edge, surface, angle drop.

0765 259 545

Chi tiêt Xem nhanh

Nonwovens Absorption Tester GT-CN02

Nonwovens Absorption Tester Model: GT-CN02 Manufacturer: Gester - China Application: This Nonwovens Absorption Tester GT-CN02 is used to test absorption of nonwoven, such as liquid absorbency time, liquid absorptive capacity, liquid wicking rate, liquid wicking height.

Protective Clothing and Masks Leakage Tester GT-RA08A

0765 259 545

0765 259 545

0765 259 545

ICI Pilling Box Tester GT-C18A

0765 259 545

Hook and Loop Fatigue Tester GT-K19

0765 259 545

Hand-press Fabric Circular Sample Cutter GT-C75-2

0765 259 545

Universal Tensile Strength Testing Machine (Geotextile) GT-C01-3

0765 259 545

Manual Rotary Vertical Crockmeter GT-D45A

0765 259 545

Protective Clothing Blood Penetration Resistance Tester GT-RC01-1 /

0765 259 545

Heel Fatigue Tester GT-KB15

0765 259 545

Double Wings Drop Falling Tester GT-LC05-2

0765 259 545

Nonwovens Absorption Tester GT-CN02

0765 259 545

Wyzenbeek or Oscillatory Abrasion Tester GT-C71

0765 259 545

Information Contact

Google map

Fanpage facebook