Protective Clothing and Masks Leakage Tester GT-RA08A

Protective Clothing and Masks Leakage Tester GT-RA08A

Protective Clothing and Masks Leakage Tester
Model: GT-RA08A
Brand: GESTER - China
Application:
To test protective clothing against solid airborne particles including radioactive contamination.
The machine use “inward leakage in %”, ratio of the concentration of contaminant in the ambient atmosphere to the concentration of the contaminant in the suit, to evaluate the quality of protective clothing.

Ứng dụng:

Protective Clothing and Masks Leakage Tester 
Model: GT-RA08A
Brand: GESTER - China

Standards:
- GB/T 29511-2013 Protective clothing- Chemical protective clothing against solid particulates4.3.1, Annex A
- GB 2626-2019Respiratory protection—Non-powered air-purifying particle respirator 6.4
- GB 19083-2010Technical requirements for protective face mask for medical use ANNEX B 

- ISO 13982,
- BS EN ISO 13982 ,
- EN149,
- EN 1073-1-2016
Key Specification

Environmental Requirement

Working temperature

(20±5)℃

Humidity

≤60%

Used space

≥4000×5000×3000mm,

water in/drain pipe, room with good ventilation

Walked-in Testing Room

Inner effective size

1800mm×1500mm×2100mm(L×W×H)

Outer size of testing room

1950mm×1650mm×2500mm(L×W×H)

Control cabinet

700mm×700mm×1600mm(L×W×H)

Environmental Analog detection system

Particle aerosol concentration

(10±1) mg/mPP3

Aerodynamics size distribution of particle

(0.02~2)μm

Mass median diameter

About 0. 6μm

Concentration variation in effective space

≤10%

Occurrence amount

≥100L/min

 

Particle Concentration Detector

 

 

2 sets

Dynamic range

(0.001~200)mg/m3

accuracy

±1%

response time

≤500 ms

Horizontal Pedal Drive Test-bed

Running speed

(5±0.5)km/h

Other Accessories

Air duct circulation and maintenance of cleaning equipment

 
Feature
A standard aerosol of sodium chloride particles is generated inside a test chamber in which a test subject, wearing the protective suit under test, carries out a predetermined sequence of test exercises. The inward leakage at each sampling position inside the suit is measured by means of flame photometry.We use following indicator to judge the quality of protective clothing.
- Lijimn: inward leakage for a given test subject (i),suit(j),exercise (m) and sampling position (n)
- Cijmn: concentration of aerosol measured at the sampling point inside the suit for a give test subject(i), suit(j(, exercise(m) and sampling position(n)
- LS: total inward leakage per suit (average over all exercises and sampling positions)
- LH: total inward leakage per human test subject (average over all exercises, sampling positions and suits worn by that test subject)
- LE: total inward leakage per exercise (average over all suits and sampling positions)
- Lp: total inward leakage per sampling position (average over all suits and exercises)
- LEP: total inward leakage per sampling position and per exercise (average over all suits)

- : mean total inward leakage (average over all test subjects, suits, exercises and sampling positions)

Controlling & Analysis system

1.Protective Clothing Against Solid Airborne Particles Tester Central control console, computer programmed control, prompting experiment process;

2.Monitoring test data automatically, calculating individual test inward leakage rate, total inward leakage rate, average inward leakage automatically, output testing result in various way.

Product Similar
Geotextile Water Permeability Tester Model: GT-C89 Brand: Gester - China Product Detail: Geotextile Water Permeability Tester GT-C89 Application: This Water Permeability Tester using for vertical permeability testing of Geotextiles and composite materials. Standards: GB/T15789, JTG E50, SL/T235, ISO11058, ASTM D4716

0765 259 545

Color Fastness to Rubbing Tester Model: GT-D06 Manufacturer: Gester - China Color Fastness to Rubbing Tester For evaluating a material's resistance to rubbing motion.

0765 259 545

Mattress Comprehensive Performance Tester  Model: GT-LA08B Brand: GESTER - China Mattress Comprehensive Performance Tester GT-LA08 is the newest design mattress comprehensive performance tester according to EN 1957 and EN 1725 standard.

0765 259 545

Electronic Rotary Vertical Crockmeter Mode: GT-D45B Manufacturer: Gester - China

0765 259 545

Mattress Comprehensive Performance Tester Model: GT-LA08A Brand: GESTER - China Mattress Comprehensive Performance Tester GT-LA08 is the newest design mattress comprehensive performance tester according to EN 1957 and EN 1725 standard.

0765 259 545

ICI Pilling Box Tester Model: GT-C18C Manufacturer: Gester - China ICI Pilling Box Tester is to determine the surface pilling and snagging properties of both woven and knitted materials.

0765 259 545

ICI Pilling Box Tester Model: GT-C18B Manufacturer: Gester - China ICI Pilling Box Tester is to determine the surface pilling and snagging properties of both woven and knitted materials.

0765 259 545

Moving Die Rheometer Model: GT-KR01 Brand: GESTER - CHINA Product Introduction Application - It is specifically designed to determine the rheological properties of rubber compounds during the curing process. - In the moving die rheometer, a rubber compound specimen positioned in a pressurized cavity is subjected to controlled heating. As the lower die produces sinusoidal oscillation, a torque sensor on the upper die detects the torque generated by the specimen.

0765 259 545

Air Permeability Tester Model: GT-C27A Brand: Gester - China Application: Air Permeability Tester is used to test the air permeability of textile fabrics, various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc.

0765 259 545